vinyl polychloride or composite material Metal sheet piles Recycled Vinyl Sheet Piles
Plastic sheet piling is made from recycled PVC,PVC brings several advantages to sheet piling, particularly in terms of product longevity, it does not rust or rot and so is ideal for permanent applications that need a low maintenance solution.
The ease of manual handling, due to the low weight of the sheet piles is becoming more of an asset; enabling the product to be carried to very access restricted sites. In terms of major schemes, this low weight reduces the number requried deliveries- less site nuisance and lower carbon foot print. Plastic sheet piling competes directly with trench sheeting and hot rolled steel sheet piling. However, over the years it has carved itself a niche between the two, for those applications that require the water tighteness of a hot rolled section, but not neccessarily the strength.
Older designs of plastic piles, such as the Economy (Standard) Z pile, are extremely lightweight and so limited in terms of drivability and load support. This has greatly improved in recent years with the introduction of the heavy duty Z and U sheet piles.
Plastic Piling has finally matured in to a tangible and effective sheet piling product, providing a viable alternative and in many cases a marked improvement over timber and steel piling. The introduction of the hybrids, providing a hard engineered alternative to popular timber staked geotextiles.
These products have also enhanced the appearance of hard engineered structures, plastic piling provides a very attractive aesthetic, compared to the industrial look of repeated corrugations.
|
Material
|
Width
|
Length
|
Thickness
|
Package
|
Color
|
|
PVC
|
457MM
|
Customization
|
11.18mm
|
Customization
|
Grey/customization
|
VINYL SHEET PILE INSTALLATION
There are a large number of techniques to drive vinyl sheet piles. The system used largely depends on the circumstances. In some situations, particularly when short lengths of Plastic Piling are being installed, it can be inserted into the ground manually by using a maul and pile cap. This is often the case in peat land areas, where the ground conditions are more favorable. When installing longer lengths, or where the ground conditions are more difficult, a piling hammer should be used. Driving the sheet pile directly can be done with a standard pneumatic hammer or a light vibrator with or without a clamp. This system is only suitable for driving at light conditions and to a limited depth.
For heavy conditions and installation from 4m up to 8m depth, it is advisable to use a steel support sheet pile with exactly the same shape as the PVC profile. With support harder soil can be penetrated and installation is speeded up because the hammer does not have to be disconnected from the steel guiding sheet pile.
Advantage of Smallboss PVC Sheet Pile
√ Does not rot or rust
√ Manufactured from recycled plastic
√ Resistant to the majority of chemicals
√ Not affected by salt water
√ Light weight, easy handling
√ Reduced impact on natural resources
INSTALLATION CRITERIA
√ Sheet pile length.
√ Soil conditions.
√ Obstructions.
√ Onshore or offshore.
√ Water depth.
Application
CUT-OFF & CONTAINMENT SYSTEMS
Small boss Vinyl Sheet Piles are frequently the optimal solution for fluid containment projects. Vinyl PVC is a inert material that can exhibit superior chemical resistance, water corrosion resistance. The interlocks of the sheet pile can be coextruded with a sealing membrane that further improves cutoff performance. Applications include but are not limited.
to:
• Groundwater cut-off
• Chemical containment
• Fluid Seepage Barriers
• Protection of Foundation Structures
Flood protection structures
Vinyl PVC Sheet Piles can be utilized for flood protection structures as an:
• Flood Walls / Flood Levee
• Stabilization of Dams
• Protection of Piping
Vinyl Sheet Piles are frequently utilized to replace old corroded sheet pile structures as a superior alternative with superior corrosion resistance that is environmentally friendly.
WATER CONTROL SOLUTIONS
Vinyl PVC Sheet Piles can be utilized for water control structures that function by altering the flow of water in a pond, drainage channel or stream. PVC sheet piles have been utilized for water control applications for decades. Examples of utilizing vinyl sheet piles relevant to water control systems include:
• Baffle Walls for water or waste water flow control
• River Weirs
• Pond Linings
• Channel Linings for agricultural applications
• River Diversion
• Mining drainage systems
Small Boss Vinyl Sheet Piles are an eco-friendly material that is light-weight, aesthetic and very corrosion resistant.
MARINE STRUCTURES
Over the last 29 years Small boss has been delivering sheet piling solutions to marine structures. Vinyl PVC Sheet Piles provide an excellent option for a long lasting structural solution due to their superior corrosion resistance, aesthetic finish and lightweight profile for easy handling and installation. The marine applications
include:
• Marine Bulkheads & Seawalls
• Tide Walls
• Breakwaters
• Wave Breaks
• Jetty Structures
• Groins
• Scour Protection and Erosion Control
Construction site
R&D
Factory visit
Loading
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 10-20 days if the goods are in stock. or it is 30-45 days if the goods are not in stock, it
is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge ,there are delivery cost to be paid by buyer.
Q: What is your terms of payment ?
A: T/T ,L/C or Alibaba Assurance.
Audited Supplier 
){kind=link}
){kind=link}